Nr | Parameter2) | Description | Comments |
1 | Radiocommunication service | - | - |
2 | Application | Non-specific SRDs | Non-specific SRD using narrow / wide-band modulation. For any type of application which fulfils the technical conditions (typical uses are telemetry, telecommand, alarms, data in general and other similar applications). Devices supporting audio and video applications shall use a digital modulation method with a maximum bandwidth of 300 kHz. Analogue audio applications are excluded. Analogue video applications are excluded. |
3 | Frequency band | 863 - 870 MHz | Sub-bands for alarms are excluded (868.6 - 868.7 MHz, 869.2 - 869.4 MHz and 869.65 - 869.7 MHz, see ERC/REC 70-03 Annex 7). In sub-band 863 - 865 MHz voice and audio conditions of RIR1009-05 and RIR1013-01 apply respectively. |
4 | Channelling | Max. 100 kHz | The preferred channel spacing is 100 kHz allowing for subdivision into 50 kHz or 25 kHz. |
5 | Modulation / Occupied bandwidth | - / Occupied bandwidth = max. 300 kHz. | - |
6 | Direction / Separation | - | - |
7 | Transmit power / Power density | Max. 25 mW e.r.p. | - |
8 | Channel access and occupation rules | Duty cycle max. 0.1 % or LBT + AFA and according to comments and EN 300 220-2. | Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 2014/53/EU must be used. Alternatively a duty cycle of max. 0.1% may also be used. |
9 | Authorisation regime | Switzerland: License exempt. Liechtenstein: General authorisation. | Operation on NIB / NPB. (Non interference basis / non protection basis). |
10 | Additional essential requirements | - | - |
11 | Frequency planning assumptions | EN 300 220-2 | ERC/REC 70-03 Annex 1 Notes 1, 2, 4. |
12 | Planned changes | - | - |
13 | Reference | EN 300 220-2 /-/ ERC/REC 70-03, Annex 1. | Effective use of spectrum / ECC Decisions / ECC Recommendations. |
14 | Notification number | G/TBT/N/CHE/170 2013/9504/CH | - |
15 | Remarks | EN 301 489-3. ECC Report 37. | Video applications should be preferably used above 2.4 GHz. |
Normative part: 1 to 11
Informative part: Nr 12 to 15
1) RIR for similar and/or other applications are available under: https://www.bakom.admin.ch/bakom/en/home/frequenzen-antennen/nationaler-frequenzzuweisungsplan/schnittstellen-anforderungen.html
2) For explanations and legal status, please refer to basis document 784.101.21 / RIR0000
© OFCOM (Swiss Federal Office of Communications)