Switzerland and the Principality of Liechtenstein
Radio Interface Regulation

784.101.21 / RIR03021)
Point-to-Point

RIR0302-16
Point-to-Point
17.700 - 19.700 GHz
13.75, 27.5 MHz / CCDP / ACCP
Edition 6.0 / 01.08.2018

Nr Parameter2)DescriptionComments
1Radiocommunication serviceFixed-
2ApplicationPoint-to-PointCCDP (Co-Channel Dual Polarization)
ACCP (Adjacent Channel Co-Polarization)
3Frequency bandA: 17.700 - 18.700 GHz
B: 18.700 - 19.700 GHz
Assignments will be made in the frequency band segments:
A2: 17.968125 - 18.208750 GHz
B2: 18.978125 - 19.218750 GHz.
4Channelling13.75 / 27.50 MHz.Channel centre frequencies according to CEPT/ERC/REC 12-03, Annex A (27.50 MHz channelling), Subdivision of 27.50 MHz channels for 13.75 MHz channelling.
5Modulation / Occupied bandwidthClass: 4H and 5LB. (32-QAM and 64-QAM or equivalent).
ACM is allowed.
BW: 13.75 / 27.50 MHz.
Definition of spectral efficiency classes: refer to EN 302 217-2, clause 4.1.1.3.
Adaptive Modulation (ACM) is allowed.
OBW with Class 4H (32-QAM): 13.75 MHz without ACM.
OBW with Class 4H (32-QAM): 27.50 MHz with or without ACM.
OBW with Class 5LB (64-QAM): 13.75 MHz without ACM.
OBW with Class 5LB (64-QAM): 27.50 MHz with or without ACM.
6Direction / Separation1010 MHzFDD
7Transmit power / Power densityMax. 46 dBW e.i.r.p.The operational e.i.r.p. will be specified in the license / individual assignment.
8Channel access and occupation rules--
9Authorisation regimeSwitzerland: License required.
Liechtenstein: Individual assignment required.
-
10Additional essential requirements--
11Frequency planning assumptionsEN 302 217-2.
Nominal RX input level = - 50 dBm.
ATPC control range = min. 12 dB to max. 20 dB.
Conditions for the nominal RX input level:
- Receiver input, point A in the system block diagram (EN 302 217-1),
- RX input level tolerance: +1 to -10 dB,
- ATPC set to min. TX output power in clear sky conditions (i.e. without rain fading).
=====
ATPC power increases shall be triggered on the basis of propagation effects only. The ATPC system shall not remain at max. available power (EN 302 217-1, clause 3.1) for more than 15 consecutive minutes (ITU-R Rec. F.750).
=====
Remote Transmit Power Control (RTPC) is considered to be an optional feature.
=====
At first CCDP has to be used and then ACCP.
=====
Limits of transmitter power spectral density: Refer to EN 302 217-2, clause 4.2.3.2, Figure 7.
=====
Allowed Reference Mode for ACM:
- 27.50 MHz channelling with 32-QAM or 64-QAM modulation.
=====
Min. link distance = 5 km outside polygon ''Alpensüdseite''.
Min. link distance = 3 km inside the polygon ''Alpensüdseite''.
Polygon ''Alpensüdseite'' coordinates CH-1903: 721311/72434; 638386/114490; 680819/156635; 716723/158677; 782207/137380.
Site sharing radius = 400 m.
=====
Class 3 antenna.
Min. antenna gain = 36 dBi.
Linear (horizontal or vertical) polarization.
Antenna radiation pattern envelope (RPE) according to EN 302 217-4, Figure 17.
OFCOM may impose tighter requirements than the minimum values given in EN 302 217-4 in order to maximize the use of the scarce spectrum resources (Class 4 antenna).
12Planned changes--
13ReferenceEN 302 217-2 / ERC/DEC (00)07 / CEPT/ERC/REC 12-03.Effective use of spectrum / ECC Decisions / ECC Recommendations.
14Notification numberG/TBT/N/CHE/170
2013/9504/CH
-
15RemarksEN 301 489-4-

Normative part: 1 to 11
Informative part: Nr 12 to 15

1) RIR for similar and/or other applications are available under: https://www.bakom.admin.ch/bakom/en/home/frequenzen-antennen/nationaler-frequenzzuweisungsplan/schnittstellen-anforderungen.html
2) For explanations and legal status, please refer to basis document 784.101.21 / RIR0000